 |
Aluma Glow offers long-term protection
for metals against oxidation and pitting of
anodized aluminum, aluminum, stainless steel, chrome, and
painted metals.
Easy to apply, wipe on, let dry
approximately 5 minutes. Self leveling. Will not crack, chip,
peel, or yellow. Protects against UV Rays, salt air, salt
water, and corrosion.
|
|
|
|
 |
|
Introducing Aluma Glow |
|
|
|
The
Aluma Glow Difference: |
|
|
|
|
|
|
BEFORE
|
AFTER
|
|
|
|
|
BEFORE
|
AFTER
|
|
|
|
|
|
|
|
|
|
|
Applying Aluma Glow |
|
|
Preparation
Clean surface with a degreaser or solvent to remove all
wax, oil, grease, and polish. Rinse with water and let
surface dry.
Application
Wipe thin coats of Aluma Glow on with a clean, white,
lint-free cloth (do not use a colored cloth.). No
buffing is required. Aluma Glow dries to the touch in
5-10 minutes. Two coats recommended.
Caution
Combustible liquid. Do not store above 120 degrees. Do
not smoke or use near open flame. Avoid breathing vapor
and prolonged skin contact. Use niltrile or neoprene
gloves.
Harmful if swallowed. Keep
out of the reach of children.
First Aid
In case of eye contact, flush with water for 15 minutes
and get medical attention. Skin contact wash with soap
and water. Respiratory difficulty provide fresh air &
call physician.
Guarantee
If you are not totally satisfied with
Aluma Glow, return unused
portion, with a copy of your receipt, within 12 months
for a full refund. |
|
|
|
|
|
Copyright MyBoatStore.com - All Rights Reserved 2008 -
Legal Stuff
|
|
|
|
 |
Login Status
