This 16 oz. kit includes everything necessary to clean, prepare, and finish approx. 25 square feet of unfinished Teak.

Aluma Glow - Protective clear-coat to protect anodized aluminum, aluminum, stainless steel, chrome, and painted metals.

This Complete PoliGlow kit contains everything you need to apply PoliGlow for the first time!

A good rule of thumb is 1 kit will cover a 32' boat up to 8 coats. The PoliGlow is applied in THIN coats, thus a little goes a long way!

32 oz. bottle of PoliGlow finish and a formed 7" applicator to replace those lost or worn ones included in the original kit. (Also, the extra applicators are great for enlisting those extra hands!) This kit is designed for those regular "maintenance coats". For stained or especially worn PoliGlowed surfaces, see our "PoliGlow Refresh Kit".

The Refresh Kit includes a 32 oz. bottle of the PoliGlow finish, 7" formed applicator, and a 20 oz. Poli Ox All-Purpose Marine Cleanser. Poli Ox is designed to assist where stains or wear have penetrated into the PoliGlow surface. Once you've removed the stains simply apply another coat of PoliGlow over the affected area to restore that "like-wet" finish.

Citrus Extract formula emulsifies oil, grease, gasoline, diesel fuel and transmission fluid. 2006 #1 Rated Bildge Cleaner by "Practical Sailor" 2006 #1 Rated By "Power Boat Reports". Pour in, run boat, drain. Biodegradable, Leaves a fresh citrus smell. 32 oz bottle will treat up to a 25' boat. See the 1 gallon container for ongoing maintenance!

Citrus Extract formula emulsifies oil, grease, gasoline, diesel fuel and transmission fluid. 2006 #1 Rated Bildge Cleaner by "Practical Sailor". 2006 #1 Rated by "Power Boat Reports". Pour in, run boat, drain. Biodegradable. Leaves a fresh citrus smell. Perfect choice for ongoing maintenance needs!

This 1/2 gallon (64 oz.) kit includes everything necessary to clean, prepare, and finish approx. 100 square feet of unfinished Teak.

These applicators are required for applying the PoliGlow finish. Comes with a 7" and a 3" sizes. Designed to ensure even distribution of the PoliGlow finish on smooth surfaces. Pole Mountable.

This 1 gallon (128 oz.) kit includes everything necessary to clean, prepare, and finish approx. 200 square feet of unfinished Teak.

303 Aerospace Protectant™ “SPF 40 Sunscreen…For Your Stuff”™ Unsurpassed UV-screening protection! Quickly and easily restores a “like-new” color, luster & gloss. Easy application. Just spray on & wipe dry. Not greasy or oily. Repels dust, soiling and staining. Treated surfaces stay cleaner, longer. Lasts 4 to 10 times longer than other products.

303 Aerospace Protectant™ “SPF 40 Sunscreen…For Your Stuff”™ Unsurpassed UV-screening protection! Quickly and easily restores a “like-new” color, luster & gloss. Easy application. Just spray on & wipe dry. Not greasy or oily. Repels dust, soiling and staining. Treated surfaces stay cleaner, longer. Lasts 4 to 10 times longer than other products.

303 Aerospace Protectant™ “SPF 40 Sunscreen…For Your Stuff”™ Unsurpassed UV-screening protection! Quickly and easily restores a “like-new” color, luster & gloss. Easy application. Just spray on & wipe dry. Not greasy or oily. Repels dust, soiling and staining. Treated surfaces stay cleaner, longer. Lasts 4 to 10 times longer than other products.

303 Fabric Cleaner Recommended by the World's Largest Manufacturer of Indoor/Outdoor Fabrics and Acrylic Canvas · Safely removes even the toughest stains · For all water-safe textiles · Non-Toxic and biodegradable

Powerful enough to protect fabrics in the harshest environment ...outdoors. Yet 303 High Tech Fabric Guard is safe for the finest fabrics, wool, silk, and fine leathers - including suede. On outdoor fabrics, 303 High Tech Fabric Guard restores lost water repellency and stain repellency to factory new levels. 303 High Tech Fabric Guard resists soiling, impedes mildew formation and helps protect against the sun's harmful UV rays.

Powerful enough to protect fabrics in the harshest environment ...outdoors. Yet 303 High Tech Fabric Guard is safe for the finest fabrics, wool, silk, and fine leathers - including suede. On outdoor fabrics, 303 High Tech Fabric Guard restores lost water repellency and stain repellency to factory new levels. 303 High Tech Fabric Guard resists soiling, impedes mildew formation and helps protect against the sun's harmful UV rays.

Powerful enough to protect fabrics in the harshest environment ...outdoors. Yet 303 High Tech Fabric Guard is safe for the finest fabrics, wool, silk, and fine leathers - including suede. On outdoor fabrics, 303 High Tech Fabric Guard restores lost water repellency and stain repellency to factory new levels. 303 High Tech Fabric Guard resists soiling, impedes mildew formation and helps protect against the sun's harmful UV rays.

Powerful enough to protect fabrics in the harshest environment ...outdoors. Yet 303 High Tech Fabric Guard is safe for the finest fabrics, wool, silk, and fine leathers - including suede. On outdoor fabrics, 303 High Tech Fabric Guard restores lost water repellency and stain repellency to factory new levels. 303 High Tech Fabric Guard resists soiling, impedes mildew formation and helps protect against the sun's harmful UV rays.

Extra scrubby brushes with handle. Perfect for enlisting those extra "hands" while using the PoliPrep to prep the hull!

Bronze Wool for use with the TeakGuard system. Comes 3 pads to a pack. A single pack will normally cover up to 25 square ft. of Teak. NEVER USE STEEL WOOL TO FINISH TEAK! Steel fibers will embed themselves in the wood and then rust underneath your brand new finish!

Poli Ox is a multi-purpose metal & fiberglass cleanser for cleaning boat decks, hulls, fish boxes, etc. Poli Ox helps remove stubborn oxidation and stains from your hull's surface.

This product can also be used to safely remove tough surface stains from your existing PoliGlow finish. Simply follow up with a coat or two of PoliGlow over the affected area to restore that like-wet shine!

Using this is considered a MUST for preparing both darker colors and metal flake boats for application of the PoliGlow finish!

This nylon brush set includes a larger brush for preping larger surfaces and a detailing brush for those hard-to-reach areas. These brushes are specifically chosen for their bristle size enabling them to properly prepare Teak surfaces for the application of the TeakGuard finish.

Extra foam brushes to replace those tired ones, or to use on those large TeakGuard applications. Usually will be enough to cover up to 25 square ft. of Teak wood.

Additional 32oz. bottles of PoliGlow Clearcoat. Often needed to supplement a PoliGlow kit on big jobs. For example: boats over 30 ft., multi-hulls, boats with large amounts of surface area, and RV's often times require additional quantities of the PoliGlow finish.

Enough TeakGuard to coat and protect approx. 25 square feet of teak. For use on previously TeakGuarded surfaces. If applying TeakGuard for the first time you'll need to use a TeakGuard kit of appropriate size, even when applying to brand new teak!

32 oz. bottle of PoliPrep concentrate. Designed to prepare surfaces for the PoliGlow finish. Removes oxidation from fiberglass & painted surfaces. Removes old wax, as well as stains caused from fuel, oil & exhausts. WILL REMOVE POLIGLOW.

This new Super Cleaner has been introduced to replace the TeakClean Cleaner. This new and more powerful formulation allows you to complete the same job while using much less product and even less elbow grease!

This new Super Cleaner has been introduced to replace the TeakClean Cleaner. This new and more powerful formulation allows you to complete the same job while using much less product and even less elbow grease!

This TeakClean Cleaner used to be included in all the TeakGuard kits. It has since been replaced by the Super Cleaner. We still carry it for those die-hards. Used in preparing Teak wood for TeakGuard application. This 16 oz. bottle will clean and brighten approx. 25 square ft of unfinished Teak.

This 1/2 Gallon (64 oz.) bottle to TeakGuard will coat and protect approx. 100 square ft. of teak. For use on previously TeakGuarded surfaces. If applying TeakGuard for the first time you'll want to use a TeakGuard kit of appropriate size, even if applying to brand new teak!