|
|
 |
TREWAX Four Seasons Boat Wax is
a long-lasting, year around, marine wax formulated with Brazilian
Carnauba for durability and shine.
We recommend this as the most effective
wax we've found and promote its use on new and like-new boats within
their first years of use.
This wax has developed a strong
following in the marine industry for two reasons. First,
unlike most carnauba waxes, TREWAX Four Seasons Boat Wax is easy to
wipe on and easy to buff off. It does not require the hard rubbing
associated with most carnauba waxes. Secondly, TREWAX Boat Wax can
be applied in direct sunlight. Try doing that with most carnauba
waxes and you'll have a mass of streaks, if you can remove the
residues!
|
 |
|
|
|
Trewax
Four Seasons Boat Wax is our pick for waxing new and
like-new boats by hand! |
|
This wax, commonly regarded
to be the industries best, is our pick for
maintaining new and like-new boats in their first few
years of service when waxing by hand or when direct
sunlight cannot be avoided due to its ease of application
and buffing. For application using buffing equipment
consider our 885 Fleetwax.
There are two aspects of
this wax's composition that make it the MyBoatStore choice in waxes:
First, the leading component is that this product
contains the most real carnauba wax of any similar
product in the industry. Carnauba wax is the
film-forming component, the one that gives weathering
protection as well as resistance to wear from foot
traffic. The only modification made to this
natural wax is that it has been treated to keep from
yellowing and polymerizing with age. In addition,
it will retain its response to buffing indefinitely.
Secondly, this product contains a notable amount of
silicone to provide added weather and water protection.
|
|
Application |
|
Best results are
achieved by applying this wax in very THIN coats,
allowing the coat to dry and then buffing by hand or
using a hand polisher.
If using a polisher, apply
the wax using a micro fiber applicator bonnet, using a 1
inch putty knife, wipe some wax on the bonnet, turn on
the polisher and allow the tool to apply the wax.
This method assures maximum square foot coverage per
can, fairly uniform wax coverage for one coat, and most
importantly, thin coats. The application of a
second coat gives optimum appearance after buffing and
insures uniform film thickness.
The application of thin
coats is important for two factors - 1. the amount
of carnauba wax in the product, and 2. there is also
some polishing abrasive in TREWAX Boat Wax. If the
film left remaining on the surface is too thick, it may
be visible and buffing may not remove application
swirls.
|
|
|
 |
|
|
Copyright MyBoatStore.com - All Rights Reserved 2008 -
Legal Stuff
|
|
|
|
|
Login Status
