|
Ultra Gloss Fiberglass
Restoring Compound:
We know there are those of you who wouldn't think of
finishing their boat with anything but a good compound. This one is
for you:
This is a new compound which is unique in several ways
designed specifically for fiberglass and gelcoat:
· Contains oxidation removing components that break down
oxidation as soon as it is applied.
· Contains a diminishing abrasive that gets finer as you
polish, leaving a super high gloss finish. (High gloss finish in 1 step
not 2 or 3!)
· Contains lubricants that reduce friction and heat, while
aiding in the ease of application. These lubricants allow for use by hand
or a high speed buffer without fear of damaging your finish.
· Contains waxes that penetrate into your gelcoat bringing
out the original color and protecting your finish so you don't immediately
have to apply a coat of wax on your new finish as you would with other
compounds.
· As soon as ultra-gloss is applied, it starts to break
down oxidation on the surface, so a ten minute lead time will actually
make the surface better prepared for your buffing and compounding.
Ultra-gloss will not dry on the surface.
Ultra-gloss compound has a special abrasive that
starts as a mid-grade compound and becomes finer as you buff ending up as
a super fine polish. This process brings up the ultra gloss and showroom
finish your boat once had.
· Ultra-gloss with its diminishing abrasive allows you to
complete all the steps necessary to bring badly oxidized or dull
fiberglass up to a high gloss finish in just one step.
· Ultra-gloss can be used by hand or by machine buffing.
Because the abrasive becomes extremely fine along with the lubricating
qualities in the compound, it allows you to use a high speed buffer
without fear of burning or harming your gelcoat.
· Finally, when you are done your new high gloss finish is
already protected with wax, so you don't have to go back and apply a coat
of wax. (This is the last thing you want to do when you finish a
compounding job!) If you are going to put the effort into restoring your
gelcoat, you should use the highest quality and easiest to use compound
there is - ULTRA-GLOSS!
 |
 |
|
Before |
After |
|
Login Status
